Schneider Electric BMH0702P21F2A Servo motor BMH - IEC 070 mm - 2,5 Nm - 8000 rpm -eje liso -con freno -doble conector acodado orientable -encoder abs ST 128b SinCos -IP65/IP67

Servo motor BMH of the Lexium 32 series servo drives. The BMH series of three-phase AC servo motors features a medium rotor inertia moment and is perfectly adapted for applications with high loads. Thanks to the winding technology, there is a very high power density in a compact design. This servo has a nominal continuous stall torque of 2.48 Nm and reaches a peak torque of 7.44 Nm. Its nominal speed can go up to 7000 RPM depending on the supply voltage. It achieves a voltage-dependent continuous output of up to 1380 W. The built-in encoder is designed as a single-turn with 128 periods/revolution (128x1024) in SinCos Hiperface format. The electrical connection is made via 2x M23 connectors, angled at 90° and rotatable. For mounting, the motor flange is 70 mm. The drive shaft has a diameter of 11 mm. The shaft end is smooth and conforms to the IP65 protection standard. The motor housing is in compliance with IP65 protection. An integrated holding brake is included. For operating this synchronous motor, the Lexium series LXM32 servo amplifiers are recommended. Thanks to the Green Premium environmental label, you can obtain detailed information about material contents, environmental impacts, and circular economy, which support your sustainability goals.