Schneider Electric BMH0701T16A2A Servo motor BMH - IEC 070 mm - 1,4 Nm - 8000 rpm -eje c chaveta -sin freno -doble conector acodado orientable -encoder abs ST 16b SinCos -IP54

Servo motor BMH from the Lexium 32 servo drive range. The BMH series of three-phase AC servo motors has a medium rotor inertia and is perfectly adapted for applications with high loads. Thanks to the winding technology, there is a very high power density in a compact design. This servo has a nominal continuous stall torque of 1.4 Nm and achieves a peak torque of 4.2 Nm. Its nominal speed, depending on the supply voltage, goes up to 5000 rpm. This results in a voltage-dependent continuous power output of up to 680 W. The built-in encoder is designed as a single turn with 16 periods/revolution (16x1024) as SinCos Hiperface. Electrical connection is via connectors 2x M23, rotated and swiveling at 90°. The motor flange is 70mm for mounting. The drive shaft has a diameter of 11mm. The shaft end is designed as keyed and conforms to the IP54 protection rating. The motor housing is rated IP65. There is no holding brake. The Lexium series LXM32 servo drives are recommended for operating the synchronous motor. Thanks to the Green Premium eco-label, you can get detailed information on material content, environmental impact and circular economy to support your sustainability goals.