Schneider Electric BMH0701T11F2A Servo motor BMH -IEC 070 mm -1,4 Nm -8000 rpm -eje c chaveta -con freno -doble conector acodado orientable - encoder abs ST 128b SinCos -IP65/IP65

Servo motor BMH series of the Lexium 32 servo drives. The BMH series of three-phase AC servo motors features a medium rotor moment of inertia and is perfectly adapted for applications with high loads. Thanks to the winding technology, there is a very high power density in a compact design. This servo has a nominal continuous stall torque of 1.4 Nm and achieves a peak torque of 4.2 Nm. Its rated speed is up to 5000 rpm depending on the supply voltage. There is a voltage-dependent nominal power up to 680 W. The built-in encoder is designed as a single turn with 128 periods/revolution (128x1024) as SinCos Hiperface. The electrical connection is made via connectors 2x M23, angled and rotatable by 90°. The motor flange for mounting is 70 mm. The drive shaft has a diameter of 11 mm. The shaft end is designed as a keyway and conforms to protection class IP54. The motor housing corresponds to protection class IP65. A holding brake is integrated. For the operation of the synchronous motor, the Lexium series LXM32 servo amplifiers are recommended. Thanks to the Green Premium eco-label, you can receive detailed information on material contents, environmental impacts, and circular economy, which support your sustainability goals.