Schneider Electric BMH0701P31A2A Servo motor BMH -IEC 070 mm -1.2 Nm -8000 rpm -eje c chaveta -sin freno -doble conector acodado orientable - encoder abs ST 128b SinCos -IP65/IP65

The BMH servo motor from the Lexium 32 servo driver series. The BMH series of three-phase AC servo motors features a medium rotor moment of inertia and is perfectly adapted for applications with high loads. Thanks to the winding technology, a very high power density is achieved in a compact design. This servo has a nominal continuous stall torque of 1.4 Nm and achieves a peak torque of 4.2 Nm. Its rated speed is up to 7000 rpm depending on the supply voltage. It results in a voltage-dependent rated power of up to 930 W. The built-in encoder is designed as single-turn with 128 periods/revolution (128x1024) as SinCos Hiperface. The electrical connection is made via connectors 2x M23, turned by 90° and rotatable. For mounting, the motor flange is 70 mm. The drive shaft has a diameter of 11 mm. The shaft end is designed as a keyway and conforms to protection rating IP65. The motor casing corresponds to protection rating IP65. There is no holding brake. For the operation of the synchronous motor, the LXM32 series Lexium servo amplifiers are recommended. With the Green Premium eco label, you can obtain detailed information on material contents, environmental impacts, and circular economy to support your sustainability goals.