Schneider Electric BMH0701P11F2A Servo motor BMH -IEC 070 mm -1,2 Nm -8000 rpm -eje c chaveta -con freno -doble conector acodado orientable - encoder abs ST 128b SinCos -IP65/IP65

Servo motor BMH from the Lexium 32 servo drive series. The BMH series of three-phase AC servo motors features a medium rotor moment of inertia and is perfectly adapted for applications with high loads. Thanks to the winding technology, there is a very high power density in a compact design. This servo has a nominal continuous stall torque of 1.4 Nm and achieves a peak torque of 4.2 Nm. Its rated speed, depending on the supply voltage, is up to 7000 rpm. This results in a voltage-dependent rated power of up to 930 W. The built-in encoder is executed as single turn with 128 periods/revolution (128x1024) as SinCos Hiperface. The electrical connection is made via connectors 2x M23, angled at 90° and rotatable. For mounting, the motor flange is 70 mm. The drive shaft has a diameter of 11 mm. The shaft end is designed as a keyway and conforms to IP54 protection. The motor housing corresponds to the protection type IP65. A holding brake is integrated. For the operation of the synchronous motor, the servo amplifiers of the Lexium series LXM32 are recommended. Thanks to the Green Premium eco-label, you can obtain detailed information about material contents, environmental impacts, and the circular economy, which support your sustainability goals.