Schneider Electric BSH1002P12F1A Servo Motor, Lexium BSH, 100mm, 5.8Nm, Keyway IP54, Multiturn 128P/R, 2xM23 straight, Brake

Servo motor BSH of the Lexium 32 servo drive series. This BSH series of three-phase AC servo motors has a low rotor inertia that enables high acceleration capability for dynamic applications. Thanks to the winding technology, a higher power density results in a compact design. This servo has a nominal continuous standstill torque of 5.8 Nm and achieves a peak torque of 18.3 Nm. Depending on the supply voltage, its rated speed is up to 4800 rpm. This results in a voltage-dependent rated power up to 2210 W. The built-in encoder is designed as a multiturn with 128 periods/revolution (128x1024x4096) as a SinCos Hiperface. The electrical connection is made via 2x M23 connectors in a straight design. For mounting, the motor flange is 100 mm. The drive shaft has a diameter of 19 mm. The shaft end is equipped with a keyway and is in compliance with the IP54 protection type. The motor housing corresponds to the protection type IP65. A holding brake is integrated. For the operation of the synchronous motor, the servo amplifiers of the Lexium series LXM32 are recommended. Thanks to the Green Premium eco-label, you can obtain detailed information about material contents, environmental impacts, and the circular economy that support your sustainability goals.