Schneider Electric BSH0551P12A2A Servomotor, Lexium BSH, 55mm, 0.5Nm, Keyway IP54, Multiturn 128P/Rev, 2xM23 angled

Servomotor BSH from the Lexium 32 servo drive series. This BSH series of three-phase AC servo motors features a low rotor moment of inertia, which enables high acceleration for dynamic applications. Thanks to the winding technology, a higher power density is achieved in a compact design. This servo has a nominal continuous stall torque of 0.5 Nm and achieves a peak torque of 1.5 Nm. Its rated speed is up to 9000 rpm depending on the supply voltage. This results in a voltage-dependent rated power of up to 440 W. The built-in encoder is executed as a multiturn with 128 periods/revolution (128x1024x4096) in SinCos Hiperface design. The electrical connection is made via connectors 2x M23, rotated by 90 degrees and rotatable. For mounting, the motor flange is 55 mm. The drive shaft has a diameter of 9 mm. The shaft end is executed with a keyway and conforms to protection class IP54. The motor housing meets the IP65 protection class. There is no holding brake. For the operation of the synchronous motor, the Lexium series LXM32 servo amplifiers are recommended. Thanks to the Green Premium environmental label, you can receive detailed information about material contents, environmental impacts, and circular economy that support your sustainability goals.