Schneider Electric BMH1002T12A2A Servo Motor, Lexium BMH, 100mm, 6.1Nm, Keyway IP54, Multiturn 128P/Rev, 2xM23 angled

Servo motor BMH of the Lexium 32 servo drive series. The BMH series of three-phase AC servo motors features a medium rotor inertia and is perfectly adapted for applications with high loads. Thanks to the winding technology, there is a very high power density in a compact design. This servo has a nominal continuous stall torque of 6.1 Nm and can reach a peak torque of 18.3 Nm. Its nominal speed amounts to up to 3500 rpm depending on the supply voltage. A voltage-dependent nominal power up to 1760 W is achieved. The built-in encoder is designed as a multiturn with 128 periods/revolution (128x1024x4096) as SinCos Hiperface. The electrical connection is made via 2x M23 connectors, angled at 90 degrees and rotatable. For mounting, the motor flange is 100 mm. The drive shaft has a diameter of 19 mm. The shaft end is designed as a keyway and is compliant with the protection rating IP54. The motor housing meets the protection rating IP65. There is no holding brake present. For the operation of the synchronous motor, the servo amplifiers of the Lexium series LXM32 are recommended. Thanks to the Green Premium eco-label, you can receive detailed information about material contents, environmental impacts and circular economy, which support your sustainability goals.