Schneider Electric BSH1404P21F2P Lexium - Moteur bsh iec 140mm 32,1 nm lisse ip65 sincos mono t.frein c.angle m40

The BSH servo motor from the Lexium 32 servo drive series. This series of three-phase AC servo motors features low rotor inertia, enabling high acceleration for dynamic applications. Thanks to winding technology, there is a higher power density in a compact design. This servo has a nominal continuous stall torque of 33.4 Nm and achieves a peak torque of 131.9 Nm. Its rated speed depends on the supply voltage and can be up to 3600 rpm. There is a voltage-dependent nominal power of up to 4190 W. The built-in encoder is executed as a single turn with 128 periods/revolution (128x1024) as SinCos Hiperface. The electrical connection is made via connectors M40 + M23, angled at 90 degrees and rotatable. For mounting, the motor flange is 140 mm. The drive shaft has a diameter of 24 mm. The shaft end is smooth and conforms to IP65 protection. The motor housing is rated as IP65. An integrated holding brake is provided. For operating the synchronous motor, the Lexium series LXM32 servo amplifiers are recommended. Thanks to the Green Premium eco-label, you can get detailed information about material contents, environmental impacts, and circular economy that support your sustainability goals.