Schneider Electric BSH1404P11A2P MOTEUR BSH IEC 140MM 32,1 NM CLAVETTE IP40 SINCOS MONO T.SS FREIN C.ANGLE M40

Servomotor BSH from the Lexium 32 servo drive series. This BSH series of three-phase AC servo motors features low rotor inertia, enabling high acceleration capability for dynamic applications. Thanks to the winding technology, a higher power density is achieved in a compact design. This servo has a nominal continuous standstill torque of 33.4 Nm and reaches a peak torque of 131.9 Nm. Its nominal speed depends on the supply voltage and can be up to 3600 rpm. A voltage-dependent nominal power of up to 4190 W is provided. The built-in encoder is implemented as single-turn with 128 periods per revolution (128x1024) as SinCos Hiperface. The electrical connection is made via connectors M40 + M23, angled at 90° and rotatable. The motor flange for mounting measures 140 mm. The drive shaft has a diameter of 24 mm. The shaft end is executed with a parallel key and complies with protection type IP54. The motor housing corresponds to protection class IP65. There is no holding brake present. For operating the synchronous motor, the servo amplifiers of the Lexium series LXM32 are recommended. With the Green Premium eco-label, you can get detailed information about material contents, environmental impacts, and the circular economy to support your sustainability goals.