Schneider Electric BSH1402T21F2P Lexium - Moteur bsh iec 140mm 19,2 nm lisse ip65 sincos mono t.frein c.angle m40

The BSH series servo motor is part of the Lexium 32 range of servo drives. This series of three-phase AC servo motors has a low rotor inertia, enabling high acceleration capability for dynamic applications. Thanks to the winding technology, a higher power density is achieved in a compact design. This servo has a rated continuous stall torque of 19.5 Nm and can reach a peak torque of 60.1 Nm. Its rated speed depends on the supply voltage and can go up to 3600 RPM. The voltage-dependent rated power can go up to 3660 W. The built-in encoder is configured as a single-turn with 128 periods per revolution (128x1024) as a SinCos Hiperface. The electrical connection is made through connectors M40 + M23, rotated and swiveled by 90 degrees. The mounting flange for the motor is 140 mm. The drive shaft has a diameter of 24 mm. The shaft end is smooth and conforms to the IP65 protection class. The motor housing is also IP65 protected. A holding brake is integrated. For the operation of the synchronous motor, the Lexium range LXM32 servo amplifiers are recommended. Thanks to the Green Premium eco-label, you can receive detailed information on material contents, environmental impacts, and circular economy that support your sustainability goals.