Schneider Electric BSH1402T21A1P MOTEUR BSH IEC 140MM 19,2 NM LISSE IP65 SINCOS MONO T.SS FREIN C.DROIT M40

Servo motor BSH of the Lexium 32 series of servo drives. This BSH series of three-phase AC servo motors features low rotor inertia, enabling high acceleration capability for dynamic applications. Thanks to winding technology, a higher power density is achieved in a compact design. This servo has a nominal continuous standstill torque of 19.5 Nm and achieves a peak torque of 60.1 Nm. Its nominal speed is up to 3600 rpm, depending on the supply voltage. A voltage-dependent nominal output of up to 3660 W is achieved. The built-in encoder is designed as a single turn with 128 periods/revolution (128x1024) as SinCos Hiperface. The electrical connection is made via M40 + M23 connectors in a straight version. The motor flange for mounting is 140 mm. The drive shaft has a diameter of 24 mm. The shaft end is smooth and complies with IP65 protection. The motor housing meets IP65 protection standards. There is no holding brake present. For the operation of the synchronous motor, the Lexium series LXM32 servo amplifiers are recommended. Thanks to the Green Premium eco-label, detailed information about material contents, environmental impacts, and circular economy is available to support your sustainability goals.