Schneider Electric BSH1402P21A2A Lexium BSH - servo-moteur - 14,9N.m - lisse IP50 - 140mm - monotour

The BSH servo motor from the Lexium 32 range of servo drives. This series of three-phase AC servo motors has a low rotor inertia, enabling high acceleration capabilities for dynamic applications. Thanks to the winding technology, a higher power density is achieved in a compact design. This servo has a nominal continuous standstill torque of 19.5 Nm and achieves a peak torque of 60.1 Nm. Depending on the supply voltage, its rated speed is up to 3600 rpm. The voltage-dependent rated power is up to 3660 W. The built-in encoder is single-turn with 128 periods/revolution (128x1024) as SinCos Hiperface. The electrical connection is made via 2x M23 connectors, angled and rotatable by 90 degrees. For mounting, the motor flange is 140 mm. The drive shaft has a diameter of 24 mm. The shaft end is smooth and complies with the IP65 protection class. The motor housing is also IP65 rated. There is no holding brake present. For the operation of the synchronous motor, the Lexium series LXM32 servo amplifiers are recommended. With the Green Premium eco-label, you can obtain detailed information on material content, environmental impacts, and the circular economy to support your sustainability goals.