Schneider Electric BSH1402P01A1A Lexium BSH - servo-moteur - 14,9N.m - lisse IP50 - 140mm - monotour

The BSH servo motor from the Lexium 32 range of servo drives. This series of three-phase AC servo motors features a low rotor inertia, which enables high acceleration for dynamic applications. Thanks to winding technology, a higher power density is achieved in a compact design. This servo has a nominal continuous stall torque of 19.5 Nm and achieves a peak torque of 60.1 Nm. Its nominal speed, depending on the supply voltage, is up to 3600 RPM. The voltage-dependent nominal power is up to 3660 W. The built-in encoder is designed as a single turn with 128 periods/revolution (128x1024) in a SinCos Hiperface format. Electrical connection is via 2x M23 connectors in a straight design. For mounting, the motor flange is 140 mm. The drive shaft has a diameter of 24 mm. The shaft end is smooth and conforms to protection class IP54. The motor housing meets protection class IP65. There is no holding brake available. For the operation of the synchronous motor, the Lexium range LXM32 servo amplifiers are recommended. Thanks to the Green Premium eco-label, you can obtain detailed information about material contents, environmental impacts, and the circular economy, which support your sustainability goals.