Schneider Electric BSH1401T31F1A Lexium BSH - servo-moteur - 11,4N.m - clavette IP65 - 140mm - monotour - frein

Lexium 32 series servo motor BSH. This BSH series of three-phase AC servo motors has a low rotor inertia, allowing for high acceleration capability for dynamic applications. Thanks to the winding technology, a higher power density is achieved in a compact design. This servo has a nominal continuous stall torque of 11.1 Nm and achieves a peak torque of 27 Nm. Its rated speed can go up to 3600 rpm depending on the supply voltage. The voltage-dependent rated power can go up to 3170 W. The built-in encoder is executed as single-turn with 128 periods per revolution (128x1024) as SinCos Hiperface. The electrical connection is via 2x M23 connectors in a straight design. For mounting, the motor flange is 140 mm. The drive shaft has a diameter of 24 mm. The shaft end is executed with a keyway and complies with the IP65 protection rating. The motor housing complies with the IP65 protection standard. An integrated holding brake is included. For operation of the synchronous motor, the servo amplifiers of the Lexium series LXM32 are recommended. Thanks to the Green Premium environmental label, you can obtain detailed information on material contents, environmental impacts, and the circular economy that support your sustainability goals.