Schneider Electric BSH1401T21A2A Lexium BSH - servo-moteur - 11,1N.m - lisse IP65 - 140mm - monotour

Servo motor BSH of the Lexium 32 servo drive series. This BSH series of three-phase AC servo motors features low rotor inertia, enabling high acceleration for dynamic applications. Thanks to the winding technology, a higher power density is achieved in a compact design. This servo has a nominal continuous stall torque of 11.1 Nm and can reach a peak torque of 27 Nm. Its rated speed, depending on the supply voltage, is up to 3600 rpm. A voltage-dependent rated power of up to 3170 W is achieved. The built-in encoder is designed as a single-turn with 128 periods per revolution (128x1024) as SinCos Hiperface. The electrical connection is made via 2x M23 connectors, which are angled at 90 degrees and rotatable. For mounting, the motor flange is 140 mm. The drive shaft has a diameter of 24 mm. The shaft end is smooth and conforms to IP65 protection type. The motor housing is also IP65 protected. There is no holding brake. For the operation of the synchronous motor, the servo amplifiers of the Lexium series LXM32 are recommended. Thanks to the Green Premium eco-label, you can receive detailed information about material content, environmental impacts, and circular economy that support your sustainability goals.