Schneider Electric BSH1004P11A2A Lexium BSH - servo-moteur - 9,3N.m - clavette IP50 - 100mm - monotour

BSH series servomotor for the Lexium 32 servo drives range. This series of three-phase AC servo motors features low rotor inertia, enabling high acceleration capability for dynamic applications. Thanks to winding technology, a higher power density is achieved in a compact design. This servo has a nominal continuous stall torque of 10 Nm and can reach a peak torque of 40.5 Nm. Its rated speed, depending on the supply voltage, is up to 3600 rpm. The voltage-dependent rated power is up to 2.6 kW. The built-in encoder is designed as a single-turn with 128 periods per revolution (128x1024) as SinCos Hiperface. The electrical connection is made via 2x M23 connectors, angled at 90 degrees and rotatable. For mounting, the motor flange is 100 mm. The drive shaft has a diameter of 24 mm. The shaft end is designed with a woodruff key and complies with the IP54 protection class. The motor housing meets the IP65 protection class. There is no holding brake present. For the operation of the synchronous motor, the Lexium series LXM32 servo controllers are recommended. Thanks to the Green Premium eco-label, you can receive detailed information about material contents, environmental impacts, and circular economy that support your sustainability goals.