Schneider Electric BSH1003P01A1A Lexium BSH - servo-moteur - 7,8N.m - lisse IP50 - 100mm - monotour

Servo motor BSH from the Lexium 32 servo drive series. This BSH series of three-phase AC servo motors features a low rotor moment of inertia, enabling high acceleration capability for dynamic applications. Thanks to winding technology, a higher power density is achieved in a compact design. This servo has a nominal continuous stall torque of 8.0 Nm and reaches a peak torque of 28.3 Nm. Its nominal speed is up to 4800 rpm, depending on the supply voltage. It has a voltage-dependent nominal power of up to 2560 W. The built-in encoder is executed as single-turn with 128 periods/revolution (128x1024) as SinCos Hiperface. Electrical connection is made via 2x M23 connectors in a straight design. The motor flange has a size of 100 mm for mounting. The drive shaft has a diameter of 19 mm. The shaft end is smooth and complies with protection class IP54. The motor housing corresponds to protection class IP65. There is no holding brake present. For operation of the synchronous motor, the Lexium series LXM32 servo amplifiers are recommended. Thanks to the Green Premium eco-label, you can obtain detailed information about material contents, environmental impacts, and circular economy, supporting your sustainability goals.