Schneider Electric BSH1002P02A1A Lexium BSH - servo-moteur - 3,4N.m - lisse IP50 - 100mm - multitour

Servo motor BSH from the Lexium 32 servo drive range. This range of three-phase AC servo motors features a low rotor inertia, enabling high acceleration capability for dynamic applications. Thanks to winding technology, a higher power density is achieved in compact design. This servo has a nominal continuous standstill torque of 5.8 Nm and achieves a peak torque of 18.3 Nm. Its rated speed depends on the supply voltage and can reach up to 4800 rpm. There is a voltage-dependent nominal power up to 2210 W. The built-in encoder is designed as a multiturn with 128 periods/rotation (128x1024x4096) as SinCos Hiperface. The electrical connection is made via 2x M23 connectors in a straight design. For mounting, the motor flange is 100 mm. The drive shaft has a diameter of 19 mm. The shaft end is smooth and complies with IP54 protection type. The motor housing corresponds to the IP65 protection class. There is no holding brake present. The Lexium range LXM32 servo amplifiers are recommended for operating the synchronous motor. Thanks to the Green Premium eco-label, you can obtain detailed information about material contents, environmental impacts and circular economy that support your sustainability goals.