Schneider Electric BSH1001T32A2A Lexium BSH - servo-moteur - 3,39N.m - clavette IP65 - 100mm - multitour

Servo motor BSH from the Lexium 32 servo drive range. This BSH series of three-phase AC servo motors features low rotor inertia, enabling high acceleration capabilities for dynamic applications. Thanks to winding technology, a higher power density is achieved in a compact design. This servo has a nominal continuous stall torque of 3.3 Nm and achieves a peak torque of 9.6 Nm. Its rated speed, depending on the supply voltage, is up to 6000 rpm. A voltage-dependent rated power of up to 1630 W is achieved. The built-in encoder is designed as a multiturn with 128 periods/revolution (128x1024x4096) in SinCos Hiperface format. The electrical connection is made via 2x M23 connectors, angled at 90° and rotatable. For mounting, the motor flange is 100 mm. The drive shaft has a diameter of 19 mm. The shaft end is designed with a keyway and according to the protection class IP65. The motor housing corresponds to protection class IP65. There is no holding brake. For operation of the synchronous motor, the Lexium series LXM32 servo amplifiers are recommended. Thanks to the Green Premium environmental label, you can obtain detailed information on material contents, environmental impacts, and circular economy, supporting your sustainability goals.