Schneider Electric BSH1001P11A1A Lexium BSH - servo-moteur - 3,4N.m - clavette IP50 - 100mm - monotour

Servo motor BSH from the Lexium 32 servo drive series. This BSH series of three-phase AC servo motors features low rotor inertia, enabling high acceleration capability for dynamic applications. Thanks to the winding technology, a higher power density is achieved in a compact design. This servo has a rated continuous stall torque of 3.3 Nm and reaches a peak torque of 9.6 Nm. Its rated speed depends on the supply voltage and can go up to 6000 rpm. A voltage-dependent rated power of up to 1630 W is possible. The built-in encoder is designed as a single turn with 128 periods/revolution (128x1024) as SinCos Hiperface. Electrical connections are made via 2x M23 connectors in a straight configuration. For mounting, the motor flange is 100 mm. The drive shaft has a diameter of 19 mm. The shaft end is equipped with a keyway and conforms to protection class IP54. The motor housing is rated IP65. There is no holding brake present. For the operation of the synchronous motor, the Lexium LXM32 series servo amplifiers are recommended. Thanks to the Green Premium eco-label, you can receive detailed information on material content, environmental impact, and circular economy that support your sustainability goals.