Schneider Electric BSH0703T32A2A Lexium BSH - servo-moteur - 2,8N.m - clavette IP65 - 70mm - multitour

Lexium 32 series servo motor BSH. This BSH series of three-phase AC servo motors features a low rotor moment of inertia, allowing for high acceleration capability for dynamic applications. Thanks to the winding technology, a higher power density is achieved in a compact design. This servo has a nominal continuous stall torque of 3.1 Nm and achieves a peak torque of 11.3 Nm. Its rated speed, depending on the supply voltage, is up to 7200 rpm. The voltage-dependent rated power goes up to 1550 W. The built-in encoder is designed as a mult-turn with 128 periods per revolution (128x1024x4096) as SinCos Hiperface. The electrical connection is made via 2x M23 connectors, angled at 90 degrees and rotatable. For mounting, the motor flange is 70 mm. The drive shaft has a diameter of 14 mm. The shaft end is equipped with a keyway and is compliant with the IP65 protection rating. The motor housing complies with the IP65 protection rating. There is no holding brake. For operation of the synchronous motor, the Lexium series LXM32 servo amplifiers are recommended. Thanks to the Green Premium eco-label, you can get detailed information on material contents, environmental impacts, and the circular economy that support your sustainability goals.