Schneider Electric BSH0703T01A2A Lexium BSH - servo-moteur - 2,8N.m - lisse IP50 - 70mm - monotour

The BSH servo motor from the Lexium 32 series of servo drives features low rotor inertia, allowing for high acceleration capability for dynamic applications. Thanks to the winding technology, higher power density is achieved in a compact design. This servo has a nominal continuous stall torque of 3.1 Nm and achieves a peak torque of 11.3 Nm. Its rated speed can reach up to 7200 RPM depending on the supply voltage, with a voltage-dependent continuous output of up to 1550 W. The built-in encoder operates as a single turn with 128 periods/revolution (128x1024) as a SinCos Hiperface. The electrical connection is made via 2x M23 connectors, angled at 90° and rotatable. The motor flange for mounting measures 70 mm. The drive shaft has a diameter of 14 mm. The shaft end is smooth, conforming to IP54 protection class. The motor housing meets IP65 protection standard. There is no holding brake present. For operating this synchronous motor, the Lexium series LXM32 servo amplifiers are recommended. With the Green Premium eco-label, you can receive detailed information on material contents, environmental impacts, and circular economy to support your sustainability goals.