Schneider Electric BSH0703P12A2A Lexium BSH - servo-moteur - 1,1N.m - clavette IP50 - 70mm - multitour

Servo motor BSH from the Lexium 32 servo drive series. This BSH series of three-phase AC servo motors features low rotor inertia allowing for high acceleration capability for dynamic applications. Thanks to the winding technology, a higher power density is achieved in a compact design. This servo has a nominal holding torque of 3.1 Nm and achieves a peak torque of 11.3 Nm. Its rated speed is up to 7200 RPM depending on the supply voltage. It has a voltage-dependent nominal power of up to 1550 W. The built-in encoder is designed as a multiturn with 128 periods/revolution (128x1024x4096) in SinCos Hiperface form. The electrical connection is made via 2x M23 connectors, angled at 90° and rotatable. For mounting, the motor flange is 70 mm. The drive shaft has a diameter of 14 mm. The shaft end is equipped with a keyway and conforms to the IP54 protection type. The motor housing corresponds to the IP65 protection type. There is no holding brake. The servo amplifiers of the Lexium series LXM32 are recommended for the operation of the synchronous motor. Thanks to the Green Premium eco-label, you can obtain detailed information about material contents, environmental impacts and circular economy, which support your sustainability goals.