Schneider Electric BSH0703P02A2A Lexium BSH - servo-moteur - 1,1N.m - lisse IP50 - 70mm - multitour

Lexium 32 servo drive range servo motor BSH. This BSH series of three-phase AC servo motors has a low rotor inertia, which enables high acceleration capability for dynamic applications. Thanks to the winding technology, a higher power density is achieved in a compact design. This servo has a nominal continuous stall torque of 3.1 Nm and achieves a peak torque of 11.3 Nm. Its rated speed depends on the supply voltage and can reach up to 7200 rpm. There is a voltage-dependent nominal power up to 1550 W. The built-in encoder is designed as a multiturn with 128 periods/revolution (128x1024x4096) in the form of SinCos Hiperface. The electrical connection is made via 2x M23 connectors, angled at 90° and rotatable. For mounting, the motor flange is 70 mm. The drive shaft has a diameter of 14 mm. The shaft end is smooth and conforms to protection class IP54. The motor housing corresponds to protection class IP65. There is no holding brake. For the operation of the synchronous motor, the servo amplifiers of the Lexium series LXM32 are recommended. Thanks to the Green Premium eco label, detailed information on material contents, environmental impacts and circular economy can be obtained, which support your sustainability goals.