Schneider Electric BSH0703P01A2A Lexium BSH - servo-moteur - 2,8N.m - lisse IP50 - 70mm - monotour

Lexium 32 series servo motor BSH. This BSH series of three-phase AC servo motors features a low rotor moment of inertia, enabling high acceleration capability for dynamic applications. Thanks to the winding technology, a higher power density is achieved in a compact design. This servo has a nominal continuous stall torque of 3.1 Nm and achieves a peak torque of 11.3 Nm. Its nominal speed depends on the supply voltage and can be up to 7200 RPM. The voltage-dependent nominal power can be up to 1550 W. The built-in encoder is implemented as a single turn with 128 periods per revolution (128x1024) as SinCos Hiperface. The electrical connection is made via 2x M23 connectors, angled at 90° and rotatable. The motor flange for mounting is 70 mm. The drive shaft has a diameter of 14 mm. The shaft end is smooth and complies with IP54 protection. The motor housing is consistent with IP65 protection. There is no holding brake present. For operating the synchronous motor, the use of Lexium series LXM32 servo amplifiers is recommended. With the Green Premium eco-label, you can receive detailed information about material contents, environmental impacts, and circular economy to support your sustainability goals.