Schneider Electric BSH0702T01A2A Lexium BSH - servo-moteur - 2,1N.m - lisse IP50 - 70mm - monotour

Servo motor BSH of the Lexium 32 servo drive series. This BSH series of three-phase AC servo motors features low rotor inertia, enabling high acceleration capability for dynamic application. Thanks to the winding technology, a higher power density results in a compact design. This servo has a nominal continuous standstill torque of 2.2 Nm and achieves a peak torque of 7.6 Nm. Its rated speed is up to 7200 rpm, depending on the supply voltage. This results in a voltage-dependent rated power of up to 1360 W. The built-in encoder is designed as a single turn with 128 periods/revolution (128x1024) as SinCos Hiperface. The electrical connection is made via 2x M23 connectors, angled at 90° and rotatable. For mounting, the motor flange is 70 mm. The drive shaft has a diameter of 11 mm. The shaft end is smooth and conforms to protection class IP54. The motor housing corresponds to protection class IP65. There is no holding brake present. For the operation of the synchronous motor, the servo amplifiers of the Lexium series LXM32 are recommended. Thanks to the Green Premium eco-label, you can get detailed information about material contents, environmental impacts, and circular economy that support your sustainability goals.