Schneider Electric BSH0701T32F2A Lexium BSH - servo-moteur - 1,4N.m - clavette IP65 - 70mm - multitour - frein

Servo motor BSH from the Lexium 32 servo drive series. This BSH series of three-phase AC servo motors features low rotor inertia, enabling high acceleration capability for dynamic applications. Thanks to winding technology, a higher power density is achieved in a compact design. This servo has a nominal continuous stall torque of 1.4 Nm and achieves a peak torque of 3.5 Nm. Its nominal speed depends on the supply voltage and is up to 7200 rpm. The voltage-dependent nominal power is up to 950 W. The built-in encoder is implemented as a multiturn with 128 periods/revolution (128x1024x4096) as SinCos Hiperface. The electrical connection is made via connectors 2x M23, angled at 90 degrees and rotatable. For mounting, the motor flange is 70 mm. The drive shaft has a diameter of 11 mm. The shaft end is designed with a keyway and conforms to the IP65 protection standard. The motor housing has an IP65 protection rating. An integrated holding brake is present. For operating the synchronous motor, the servo amplifiers of the Lexium LXM32 series are recommended. Thanks to the Green Premium eco-label, you can obtain detailed information about material contents, environmental impacts, and the circular economy that support your sustainability goals.