Schneider Electric BSH0701P31A2A Lexium BSH - servo-moteur - 1,4N.m - clavette IP65 - 70mm - monotour

Servo motor BSH from the Lexium 32 servo drive series. This BSH series of three-phase AC servo motors features low rotor inertia, enabling high acceleration capability for dynamic applications. Thanks to the winding technology, a higher power density is achieved in a compact design. This servo has a nominal holding torque of 1.4 Nm and achieves a peak torque of 3.5 Nm. Its rated speed depends on the supply voltage, up to 7200 rpm. This results in a voltage-dependent rated power up to 950 W. The built-in encoder is designed as a single turn with 128 periods/revolution (128x1024) as SinCos Hiperface. The electrical connection is made via connectors 2x M23, angled and rotatable by 90°. The motor flange for mounting is 70 mm. The drive shaft has a diameter of 11 mm. The shaft end is equipped with a keyway and conforms to protection class IP65. The motor housing is also rated at IP65 protection. There is no holding brake present. For operating the synchronous motor, the Lexium series LXM32 servo amplifiers are recommended. Thanks to the Green Premium eco-label, you can obtain detailed information about material contents, environmental impacts, and the circular economy that support your sustainability goals.