Schneider Electric BSH0701P11A1A Lexium BSH - servo-moteur - 1,4N.m - clavette IP50 - 70mm - monotour

Servo motor BSH from the Lexium 32 servo drive range. This BSH series of three-phase AC servo motors features low rotor inertia, which enables high acceleration capabilities for dynamic applications. Thanks to winding technology, a higher power density is achieved in a compact design. This servo has a nominal continuous stall torque of 1.4 Nm and achieves a peak torque of 3.5 Nm. Its rated speed depends on the supply voltage and can reach up to 7200 RPM. The voltage-dependent rated power can reach up to 950 W. The built-in encoder is designed as a singleturn with 128 periods/revolution (128x1024) as SinCos Hiperface. The electrical connection is via 2x M23 connectors in a straight design. For mounting, the motor flange is 70 mm. The drive shaft has a diameter of 11 mm. The shaft end is designed with a feather key and conforms to IP54 protection. The motor housing is rated IP65. There is no holding brake present. For operating the synchronous motor, the Lexium range LXM32 servo amplifiers are recommended. Thanks to the Green Premium eco-label, you can obtain detailed information on material contents, environmental impacts, and circular economy to support your sustainability goals.