Schneider Electric BSH0553T01A2A Lexium BSH - servo-moteur - 1,3N.m - lisse IP50 - 55mm - monotour

Servo motor BSH from the Lexium 32 servo drive series. This BSH series of three-phase AC servo motors features low rotor inertia, enabling high acceleration capability for dynamic applications. Thanks to the winding technology, there is a higher power density in a compact design. This servo has a nominal continuous stall torque of 1.2 Nm and achieves a peak torque of 3.5 Nm. Its nominal speed is up to 9000 rpm, depending on the supply voltage. The voltage-dependent nominal power is up to 970 W. The built-in encoder is a single turn with 128 periods/revolution (128x1024) executed as SinCos Hiperface. The electrical connection is made via connectors 2x M23, angled and rotatable by 90 degrees. The mounting flange of the motor is 55 mm. The drive shaft has a diameter of 9 mm. The shaft end is smooth and conforms to IP54 protection. The motor housing is IP65 rated. There is no holding brake. For the operation of the synchronous motor, we recommend the Lexium series LXM32 servo amplifiers. Thanks to the Green Premium eco-label, you can get detailed information on material contents, environmental impacts, and the circular economy that support your sustainability goals.