Schneider Electric BSH0553P11A1A Lexium BSH - servo-moteur - 1,3N.m - clavette IP50 - 55mm - monotour

Servo motor BSH from the Lexium 32 servo drive series. This range of BSH three-phase AC servo motors has a low rotor inertia, enabling high acceleration capability for dynamic applications. Thanks to the winding technology, a higher power density is achieved in a compact design. This servo has a nominal continuous stall torque of 1.2 Nm and reaches a peak torque of 3.5 Nm. Depending on the supply voltage, its rated speed is up to 9000 rpm. The voltage-dependent rated power is up to 970 W. The built-in encoder is designed as a single turn with 128 periods/revolution (128x1024) as SinCos Hiperface. The electrical connection is made via 2x M23 connectors in a straight design. For mounting purposes, the motor flange is 55 mm. The drive shaft has a diameter of 9 mm. The shaft end is equipped with a Woodruff key and conforms to protection class IP54. The motor housing complies with protection class IP65. There is no holding brake. For the operation of the synchronous motor, the Lexium series LXM32 servo amplifiers are recommended. Thanks to the Green Premium eco-label, you can obtain detailed information about material contents, environmental impacts, and the circular economy, which support your sustainability goals.