Schneider Electric BMH1003T32A2A MOTEUR 100MM IEC 8,4NM IP65 2200W CLAV. ENC. SINCOS MULTIT.128 CONN.ANG.

The BMH servo motor from the Lexium 32 range of servo drives. The BMH series of three-phase AC servo motors has a medium rotor inertia and is perfectly adapted for applications with high loads. Thanks to the winding technology, a very high power density is achieved in a compact design. This servo has a nominal continuous stall torque of 7.5 Nm and reaches a peak torque of 25.5 Nm. Its rated speed is up to 3000 rpm depending on the supply voltage. A voltage-dependent continuous power up to 2280 W is achieved. The built-in encoder is designed as a multiturn with 128 periods/revolution (128x1024x4096) as SinCos Hiperface. The electrical connection is made via 2x M23 connectors, angled at 90 degrees and rotatable. The motor flange is 100 mm for mounting. The drive shaft has a diameter of 19 mm. The shaft end is designed as a feather key and conforms to protection class IP65. The motor housing meets IP65 protection. There is no holding brake. The Lexium series LXM32 servo amplifiers are recommended for the operation of the synchronous motor. Thanks to the Green Premium eco-label, you can obtain detailed information about material contents, environmental impacts, and circular economy that support your sustainability goals.