Schneider Electric BMH1003T11A2A Lexium - Moteur 100mm iec 8,2nm ip54 2200w clav. enc. sincos monot.128 conn.ang.

Servo motor BMH from the Lexium 32 servo drive series. The BMH series of three-phase AC servo motors features a medium rotor moment of inertia and is perfectly adapted for high-load applications. Thanks to the winding technology, a very high power density is achieved in a compact design. This servo has a nominal continuous standstill torque of 7.5 Nm and achieves a peak torque of 25.5 Nm. Its rated speed is up to 3000 rpm, depending on the supply voltage, resulting in a voltage-dependent rated power of up to 2280 W. The built-in encoder is designed as a single turn with 128 periods/revolution (128x1024) as SinCos Hiperface. The electrical connection is made via 2x M23 connectors, angled at 90° and rotatable. For mounting, the motor flange is 100 mm. The drive shaft has a diameter of 19 mm. The shaft end is designed as a keyway and conforms to the protection class IP54. The motor housing meets IP65 protection class. There is no holding brake present. For operating the synchronous motor, the servo amplifiers of the Lexium series LXM32 are recommended. Thanks to the Green Premium environmental label, you can get detailed information about material contents, environmental impacts, and recycling economy to support your sustainability goals.