Schneider Electric BMH1002P11F1A MOTEUR 100MM IEC 5,9NM IP54 1700W CLAV. ENC. SINCOS MONOT.128 CONN.DROIT FREIN

The BMH series servo motor from the Lexium 32 range of servo drives. The BMH series three-phase AC servo motors have a medium rotor moment of inertia, making them perfectly adapted for applications with high loads. Due to the winding technology, a very high power density is achieved in a compact design. This servo has a nominal continuous stall torque of 6.0 Nm and reaches a peak torque of 18.0 Nm. Depending on the supply voltage, its rated speed is up to 5000 rpm. The voltage-dependent rated power is up to 2270 W. The built-in encoder is designed as a single-turn with 128 periods per revolution (128x1024) as SinCos Hiperface. The electrical connection is made via 2x M23 connectors in a straight design. For mounting, the motor flange is 100 mm. The drive shaft has a diameter of 19 mm. The shaft end is designed as a keyway and complies with IP54 protection. The motor housing complies with IP65 protection. A holding brake is integrated. For the operation of the synchronous motor, the Lexium range LXM32 servo amplifiers are recommended. Thanks to the Green Premium eco-label, you can obtain detailed information on material contents, environmental impacts, and circular economy that supports your sustainability goals.