Schneider Electric BMH1001T37A2A Lexium - Moteur 100mm iec 3,6nm ip65 1100w clav. enc. sincos multit.16 conn.ang.

Servo motor BMH from the Lexium 32 servo drive series. The BMH series of three-phase AC servo motors feature a medium rotor inertia moment and are perfectly adapted for applications with high loads. Thanks to the winding technology, a very high power density is achieved in a compact design. This servo has a nominal continuous stall torque of 3.4 Nm and reaches a peak torque of 10.2 Nm. Its rated speed, depending on the supply voltage, is up to 4000 rpm. This results in a voltage-dependent nominal power up to 1200 W. The built-in encoder is designed as a multiturn with 16 periods/revolution (16x1024x4096) as SinCos Hiperface. The electrical connection is made via 2x M23 connectors, angled at 90° and rotatable. For mounting, the motor flange measures 100 mm. The drive shaft has a diameter of 19 mm. The shaft end is designed as a keyway and conforms to the protection type IP65. The motor housing is also according to protection type IP65. There is no holding brake present. For the operation of the synchronous motor, the servo amplifiers of the Lexium series LXM32 are recommended. Thanks to the Green Premium eco-label, you can receive detailed information on material contents, environmental impacts, and circular economy that support your sustainability goals.