Schneider Electric BMH1001T36A2A Lexium - Moteur 100mm iec 3,6nm ip65 1100w clav. enc. sincos monot.16 conn.ang.

Servo motor BMH from the Lexium 32 servo drive range. The BMH series of three-phase AC servo motors have a medium rotor moment of inertia and are perfectly adapted for applications with high loads. Thanks to the winding technology, a very high power density is achieved in a compact design. This servo has a nominal continuous stall torque of 3.4 Nm and reaches a peak torque of 10.2 Nm. Its rated speed is up to 4000 rpm depending on the supply voltage. It results in a voltage-dependent rated power up to 1200 W. The built-in encoder is designed as a single-turn with 16 periods/revolution (16x1024) as SinCos Hiperface. The electrical connection is made via 2x M23 connectors, angled at 90 degrees and rotatable. For mounting, the motor flange is 100 mm. The drive shaft has a diameter of 19 mm. The shaft end is designed as a keyed shaft and conforms to the IP65 protection class. The motor housing corresponds to the protection class IP65. There is no holding brake present. For the operation of the synchronous motor, the Lexium series LXM32 servo amplifiers are recommended. Thanks to the Green Premium eco-label, you can obtain detailed information on material contents, environmental impacts, and circular economy that support your sustainability goals.