Schneider Electric BMH1001T31A2A Lexium - Moteur 100mm iec 3,4nm ip65 1100w clav. enc. sincos monot.128 conn.ang.

The BMH servo motor from the Lexium 32 series of servo drives. The BMH series of three-phase AC servo motors features a medium rotor inertia and is perfectly adapted for applications with high loads. Thanks to the winding technology, a very high power density is achieved in a compact design. This servo has a nominal continuous stall torque of 3.4 Nm and achieves a peak torque of 10.2 Nm. Depending on the supply voltage, its nominal speed is up to 4000 rpm. A voltage-dependent nominal output of up to 1200 W results. The built-in encoder is executed as a single turn with 128 periods/revolution (128x1024) as SinCos Hiperface. The electrical connection is made via 2x M23 connectors, angled at 90° and rotatable. The motor flange for mounting measures 100 mm. The drive shaft has a diameter of 19 mm. The shaft end is designed as a keyway and conforms to the IP65 protection rating. The motor housing complies with the IP65 protection standard. There is no holding brake. For the operation of the synchronous motor, the Lexium series LXM32 servo amplifiers are recommended. Thanks to the Green Premium eco-label, you can obtain detailed information on material content, environmental impact and circular economy that supports your sustainability goals.