Schneider Electric BMH1001T21A2A Lexium - Moteur 100mm iec 3,4nm ip65 1100w lisse enc. sincos monot.128 conn.ang.

Servo motor BMH from the Lexium 32 series of servo drives. The BMH series three-phase AC servo motors feature a medium rotor inertia and are perfectly adapted for applications with high loads. Thanks to the winding technology, there is a very high power density in a compact design. This servo has a nominal continuous stall torque of 3.4 Nm and reaches a peak torque of 10.2 Nm. Its rated speed, depending on the supply voltage, is up to 4000 rpm. This results in a voltage-dependent rated power of up to 1200 W. The built-in encoder is designed as single-turn with 128 periods/revolution (128x1024) as SinCos Hiperface. The electrical connection is made via connectors 2x M23, angled at 90° and rotatable. For mounting, the motor flange is 100 mm. The drive shaft has a diameter of 19 mm. The shaft end is smooth and conforms to IP65 protection. The motor housing meets IP65 protection. There is no holding brake present. For the operation of the synchronous motor, the Lexium series LXM32 servo amplifiers are recommended. Thanks to the Green Premium eco-label, you can obtain detailed information about material contents, environmental impacts, and the circular economy that support your sustainability goals.