Schneider Electric BMH1001T17A2A Lexium - Moteur 100mm iec 3,6nm ip54 1100w clav. enc. sincos multit.16 conn.ang.

Lexium 32 range BMH servo motor. The BMH series of three-phase AC servo motors features medium rotor inertia and is perfectly adapted for applications with high loads. Thanks to the winding technology, there is a very high power density in a compact design. This servo has a nominal continuous standstill torque of 3.4 Nm and achieves a peak torque of 10.2 Nm. Its rated speed, depending on the supply voltage, is up to 4000 RPM. A voltage-dependent nominal output of up to 1200 W results. The built-in encoder is designed as a multiturn with 16 periods per revolution (16x1024x4096) as SinCos Hiperface. The electrical connection is made via 2x M23 connectors, angled at 90° and rotatable. For mounting, the motor flange is 100 mm. The drive shaft has a diameter of 19 mm. The shaft end is designed as a keyway and complies with protection type IP54. The motor housing corresponds to protection type IP65. There is no holding brake. For the operation of the synchronous motor, the Lexium series LXM32 servo amplifiers are recommended. Thanks to the Green Premium eco-label, you can obtain detailed information about material contents, environmental impacts, and circular economy that support your sustainability goals.