Schneider Electric BMH1001T11A2A Lexium - Moteur 100mm iec 3,4nm ip54 1100w clav. enc. sincos monot.128 conn.ang.

Servo motor BMH from the Lexium 32 servo drive range. The BMH series of three-phase AC servo motors features a medium rotor moment of inertia and is perfectly adapted for applications with high loads. Thanks to the winding technology, there is a very high power density in a compact design. This servo has a nominal continuous stall torque of 3.4 Nm and reaches a peak torque of 10.2 Nm. Its rated speed is up to 4000 rpm depending on the supply voltage. A supply voltage-dependent nominal power of up to 1200 W results. The built-in encoder is designed as a single turn with 128 periods/revolution (128x1024) as SinCos Hiperface. The electrical connection is made via connectors 2x M23, angled and rotatable at 90°. For mounting, the motor flange is 100 mm. The drive shaft has a diameter of 19 mm. The shaft end is designed as a keyway and conforms to protection class IP54. The motor housing is in accordance with protection class IP65. There is no holding brake present. For the operation of the synchronous motor, the Lexium series LXM32 servo amplifiers are recommended. Thanks to the Green Premium eco-label, you can obtain detailed information on material contents, environmental impacts, and the circular economy, supporting your sustainability goals.