Schneider Electric BMH1001P11F1A MOTEUR 100MM IEC 3,4NM IP54 1100W CLAV. ENC. SINCOS MONOT.128 CONN.DROIT FREIN

Servo motor BMH from the Lexium 32 servo drive range. The BMH series of three-phase AC servo motors has a medium rotor inertia and is perfectly adapted for applications with high loads. Thanks to the winding technology, there is a very high power density in a compact design. This servo has a nominal continuous stall torque of 3.4 Nm and achieves a peak torque of 10.2 Nm. Its rated speed is up to 5000 rpm depending on the supply voltage. There is a voltage-dependent rated power of up to 1520 W. The built-in encoder is implemented as a single-turn with 128 periods/revolution (128x1024) as SinCos Hiperface. The electrical connection is made via 2x M23 connectors in a straight version. For mounting, the motor flange is 100 mm. The drive shaft has a diameter of 19 mm. The shaft end is designed as a keyway and conforms to protection class IP54. The motor housing meets the IP65 protection class. A holding brake is integrated. For the operation of the synchronous motor, the servo amplifiers of the Lexium series LXM32 are recommended. With the Green Premium eco-label, you can obtain detailed information on material contents, environmental impacts and circular economy that support your sustainability goals.