Schneider Electric BMH0703T32A2A Lexium - Moteur 70mm iec 3,4nm ip65 900w clav. enc. sincos multit.128 conn.ang.

The BMH servomotor is part of the Lexium 32 servo drive series. The BMH series of three-phase AC servo motors has a medium rotor inertia and is perfectly adapted for applications with high loads. Thanks to the winding technology, there is a very high power density in a compact design. This servo has a nominal continuous stall torque of 3.4 Nm and achieves a peak torque of 10.2 Nm. Its rated speed, depending on the supply voltage, is up to 4000 rpm. This results in a voltage-dependent nominal power of up to 1130 W. The built-in encoder is designed as a multiturn with 128 periods/revolution (128x1024x4096) as SinCos Hiperface. The electrical connection is made via 2x M23 connectors, angled at 90° and rotatable. For mounting, the motor flange is 70 mm. The drive shaft has a diameter of 14 mm. The shaft end is designed as a keyway and conforms to protection class IP65. The motor housing conforms to protection class IP65. There is no holding brake available. For the operation of the synchronous motor, the servo amplifiers of the Lexium series LXM32 are recommended. Thanks to the Green Premium eco-label, you can obtain detailed information on material content, environmental impacts, and circular economy to support your sustainability goals.