Schneider Electric BMH0703T21A2A Lexium - Moteur 70mm iec 3,4nm ip65 900w lisse enc. sincos monot.128 conn.ang.

The BMH series of the Lexium 32 servo drives represents three-phase AC servomotors with a medium rotor inertia, perfectly adapted for applications with high loads. Thanks to its winding technology, a very high power density is achieved in a compact design. This servo motor has a nominal continuous stall torque of 3.4 Nm and reaches a peak torque of 10.2 Nm. Its rated speed is up to 4000 rpm, depending on the supply voltage, resulting in a voltage-dependent rated power of up to 1130 W. The built-in encoder is designed as a single turn with 128 periods per revolution (128x1024) and implemented as SinCos Hiperface. The electrical connection is made via 2x M23 connectors, angled at 90 degrees and rotatable. The motor flange is 70 mm for mounting. The drive shaft has a diameter of 14 mm. The shaft end is smooth and complies with protection class IP65. The motor housing is rated IP65. There is no holding brake. The use of Lexium series LXM32 servo amplifiers is recommended for operating the synchronous motor. Thanks to the Green Premium eco-label, you can receive detailed information about material contents, environmental impacts, and circular economy, which support your sustainability goals.