Schneider Electric BMH0701T31A2A Lexium - Moteur 70mm iec 1,4nm ip65 400w clav. enc. sincos monot.128 conn.ang.

The BMH servo motor from the Lexium 32 servo drive series. The BMH series of three-phase AC servo motors has a medium rotor inertia and is perfectly adapted for applications with high loads. Thanks to the winding technology, there is a very high power density in a compact design. This servo has a nominal continuous stall torque of 1.4 Nm and achieves a peak torque of 4.2 Nm. Its rated speed depends on the supply voltage and can reach up to 5000 RPM. The voltage-dependent rated power can reach up to 680 W. The built-in encoder is executed as single turn with 128 periods per revolution (128x1024) as SinCos Hiperface format. The electrical connection is made via connectors 2x M23, angled at 90 degrees and rotatable. For mounting, the motor flange is 70 mm. The drive shaft has a diameter of 11 mm. The shaft end is designed as keyway, conforming to protection class IP65. The motor housing meets IP65 protection class. There is no holding brake present. For operation of the synchronous motor, the servo amplifiers of the Lexium series LXM32 are recommended. With the Green Premium environmental label, you can obtain detailed information about material contents, environmental impacts, and circular economy to support your sustainability goals.