Schneider Electric BMH0701P36A2A Lexium - Moteur 70mm iec 1,4nm ip65 400w clav. enc. sincos monot.16 conn.ang.

Servo motor BMH from the Lexium 32 series of servo drives. The BMH series of three-phase AC servo motors has a medium rotor moment of inertia and is perfectly adapted for applications with high loads. The winding technology results in a very high power density in a compact design. This servo has a nominal continuous stall torque of 1.4 Nm and reaches a peak torque of 4.2 Nm. Its rated speed depends on the supply voltage and can go up to 7000 rpm. This results in a voltage-dependent rated output of up to 930 W. The built-in encoder is designed as a single turn with 16 periods per rotation (16x1024) in SinCos Hiperface. The electrical connection is made via 2x M23 connectors, angled at 90° and rotatable. For mounting, the motor flange is 70 mm. The drive shaft has a diameter of 11 mm. The shaft end is designed as a keyway and conforms to the IP65 protection class. The motor housing corresponds to the protection class IP65. There is no holding brake present. For the operation of the synchronous motor, the Lexium range LXM32 servo controllers are recommended. Thanks to the Green Premium eco-label, you can get detailed information about material contents, environmental impacts and the circular economy to support your sustainability goals.