Schneider Electric BSH1401P22A2A Servo motor BSH - IEC 140 mm - 11,4 Nm - 1500 rpm -eje liso -sin freno -doble conector acodado orientable -encoder abs MT 128b SinCos -IP65/IP67

Servo motor BSH of the Lexium 32 series of servo drives. This BSH series of three-phase AC servo motors features a low rotor moment of inertia, enabling a high acceleration capability for dynamic applications. Thanks to winding technology, there is a higher power density in a compact design. This servo has a nominal continuous stall torque of 11.1 Nm and achieves a peak torque of 27 Nm. Its nominal speed depends on the supply voltage up to 3600 rpm. This results in a voltage-dependent nominal output up to 3170 W. The built-in encoder is designed as a multiturn with 128 periods / revolution (128x1024x4096) as SinCos Hiperface. The electrical connection is made via connectors 2x M23, angled at 90° and rotatable. For mounting, the motor flange is 140 mm. The drive shaft has a diameter of 24 mm. The shaft end is smooth and complies with the protection class IP65. The motor housing meets the IP65 protection class. No holding brake is available. The servo amplifiers of the Lexium series LXM32 are recommended for the operation of the synchronous motor. Thanks to the Green Premium eco-label, you can obtain detailed information about material contents, environmental impacts and a circular economy that supports your sustainability goals.