Schneider Electric BSH0702P11F1A Servo motor BSH - IEC 070 mm - 2,1 Nm - 3000 rpm -eje c chaveta -con freno -doble conector recto -encoder abs ST 128b SinCos -IP54

Servomotor BSH from Lexium 32 servo drive series. This range of three-phase AC servo motors features low rotor inertia, which enables high acceleration capabilities for dynamic applications. Thanks to winding technology, higher power density is achieved in a compact design. This servo has a nominal continuous stall torque of 2.2 Nm and reaches a peak torque of 7.6 Nm. Its rated speed is up to 7200 rpm depending on the supply voltage. A voltage-related nominal power output of up to 1360 W is achieved. The built-in encoder is designed as a single turn with 128 periods/revolution (128x1024) in SinCos Hiperface format. The electrical connection is made via 2x M23 connectors in a straight design. For mounting, the motor flange is 70mm. The drive shaft has a diameter of 11mm. The shaft end is equipped with a keyway and conforms to protection rating IP54. The motor housing corresponds to protection rating IP65. A holding brake is integrated. For the operation of the synchronous motor, the servo amplifiers of the Lexium series LXM32 are recommended. The Green Premium eco-label allows you to obtain detailed information on material contents, environmental impacts, and circular economy, which supports your sustainability goals.