Schneider Electric BMH2052P36F1A Servo motor BMH - IEC 205 mm - 62,5 Nm - 3800 rpm -eje c chaveta -con freno -doble conector recto -encoder abs ST 16b SinCos -IP65/IP67

The BMH series servo motor from the Lexium 32 range of servo drives. The BMH series of three-phase AC servo motors is characterised by a medium rotor moment of inertia and is perfectly adapted for applications with high loads. Thanks to winding technology, there is a very high power density in a compact design. This servo motor has a nominal continuous stall torque of 62.5 Nm and achieves a peak torque of 220 Nm. Its nominal speed depends on the supply voltage and is up to 2400 rpm. A voltage-dependent nominal power of up to 6.26 kW is achieved. The built-in encoder is executed as a single turn with 16 periods/revolution (16x1024) as a SinCos Hiperface. Electrical connections are made via 2x M23 connectors in a straight design. For mounting, the motor flange is 205 mm. The drive shaft has a diameter of 38 mm. The shaft end is designed as a keyway and conforms to the protection type IP65. The motor housing meets the protection type IP65. An integrated holding brake is provided. The LXM32 range of servo amplifiers is recommended for the operation of the synchronous motor. Thanks to the Green Premium eco-label, you can obtain detailed information on material content, environmental impact, and circular economy that support your sustainability goals.