Schneider Electric BMH2051P11A1A Servo motor BMH -IEC 205 mm -4,4 Nm -3800 rpm -eje c chaveta -sin freno -doble conector recto - encoder abs ST 128b SinCos -IP65/IP65

The BMH servo motor is part of the Lexium 32 series of servo drives. The BMH series of three-phase AC servo motors is characterized by a medium rotor inertia momentum and is perfectly suited for applications with high loads. Thanks to the winding technology, there is a very high power density in a compact design. This servo has a nominal continuous stall torque of 34.4 Nm and achieves a peak torque of 110 Nm. Its rated speed is up to 3600 rpm depending on the supply voltage. A voltage-dependent nominal power of up to 6.75 kW results. The built-in encoder is designed as single-turn with 128 periods per revolution (128x1024) as SinCos Hiperface. The electrical connection is via connectors M40 and M23 in a straight design. For mounting, the motor flange is 205 mm. The drive shaft has a diameter of 38 mm. The shaft end is designed as a keyway and conforms to protection class IP54. The motor housing meets the IP65 protection class. There is no holding brake. For the operation of the synchronous motor, the Lexium series LXM32 servo amplifiers are recommended. Thanks to the Green Premium environmental label, you can obtain detailed information about material contents, environmental impacts, and the circular economy that support your sustainability goals.